Toyota 2008 Camry Owner'S Manual Download

Page: 176 / 564

176

4-3. Operating the lights and wipers

CAMRY_HV_U (OM33A87U)

When all of the following conditions are fulfilled, high beam will be
automatically turned on:

●

Vehicle speed is above approximately 21 mph (34 km/h).

●

The area ahead of the vehicle is dark.

●

There are no oncoming or preceding vehicles with headlights or tail
lights turned on.

●

There are few streetlights on the road ahead.

If any of the following conditions are fulfilled, high beam will be auto-
matically turned off:

●

Vehicle speed drops below approximately 17 mph (27 km/h).

●

The area ahead of the vehicle is not dark.

●

Oncoming or preceding vehicles have headlights or tail lights
turned on.

●

There are many streetlights on the road ahead.

■

Switching to low beam

Pull the lever to the original
position.

■

Switching to high beam

Turn the light switch to

The Automatic High Beam indi-
cator will turn off and the high
beam indicator will turn on.

High beam automatic turning on or off conditions

Turning the high beam on/off manually

Summary of Contents for 2008 Camry





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Camry

Reviews:

Related manuals for 2008 Camry

Brands by name

Popular brands

Toyota 2008 Camry, Owner'S Manual

Search results

Summary of Contents for 2008 Camry

Reviews:

Related manuals for 2008 Camry

Brands by name

Popular brands