Toyota 2008 Camry Owner'S Manual Download

Page: 493 / 564

493

8-2. Steps to take in an emergency

Whe

n t
roub

le
aris

CAMRY_HV_U (OM33A87U)

■

If “Hybrid System Overheat” is shown on the multi-information
display

Stop the vehicle in a safe place.

Stop the hybrid system and carefully lift the hood.

After the hybrid system has
cooled down, inspect the
hoses and radiator core
(radiator) for any leaks.

Radiator

Cooling fans

If a large amount of coolant
leaks, immediately contact
your Toyota dealer.

The coolant level is satisfac-
tory if it is between the
“FULL” and “LOW” lines on
the reservoir.

Reservoir

“FULL”

“LOW”

Add coolant if necessary.

Water can be used in an emer-
gency if coolant is unavailable.

Start the hybrid system and check for the multi-information dis-
play.

If the message does not disappear:

Stop the hybrid system and contact your Toyota dealer.

If the message is not displayed:

Have the vehicle inspected at the nearest Toyota dealer.

1
2
3

1
2

1
2
3

Summary of Contents for 2008 Camry





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Camry

Reviews:

Related manuals for 2008 Camry

Brands by name

Popular brands

Toyota 2008 Camry, Owner'S Manual

Search results

Summary of Contents for 2008 Camry

Reviews:

Related manuals for 2008 Camry

Brands by name

Popular brands