Toyota 2008 Camry, Owner'S Manual

Page: 220 / 564

220
4-5. Using the driving support systems
CAMRY_HV_U (OM33A87U)
■
Turning off both TRAC and VSC systems
To turn the TRAC and VSC systems off, press and hold for more than 3
seconds while the vehicle is stopped.
The VSC OFF indicator light will come on and the “TRAC OFF” and a mes-
sage will be shown on the multi-information display
*
.
Press again to turn the systems back on.
*
: On vehicles with pre-collision system, pre-collision brake assist and pre-
collision braking will also be disabled. The pre-collision system warning
light will come on and the message will be shown on the multi-information
display. (

P. 227)
■
When the message is displayed on the multi-information display show-
ing that TRAC has been disabled even if has not been pressed
TRAC and hill-start assist control cannot be operated. Contact your Toyota
dealer.
■
Sounds and vibrations caused by the ABS, brake assist, TRAC and VSC
systems
Any of the following conditions may occur when the above systems are oper-
ating. None of these indicates that a malfunction has occurred.
●
Vibrations may be felt through the vehicle body and steering.
●
A motor sound may be heard after the vehicle comes to a stop.
●
The brake pedal may pulsate slightly after the ABS is activated.
●
The brake pedal may move down slightly after the ABS is activated.
■
ECB operating sound
ECB operating sound may be heard in the following cases, but it does not
indicate that a malfunction has occurred.
●
Operating sound heard from engine compartment when the brake pedal is
operated.
●
Motor sound of the brake system heard from the front part of the vehicle
when the driver’s door is opened.
●
Operating sound heard from the engine compartment when one or two min-
utes passed after the stop of the hybrid system.
■
EPS operation sound
When the steering wheel is operated, a motor sound (whirring sound) may be
heard. This does not indicate a malfunction.