Toyota 2008 Camry Owner'S Manual Download Page 203

Page: 203 / 564

203

4-5. Using the driving support systems

riv

ing

CAMRY_HV_U (OM33A87U)

●

When the vehicle speed is approximately 32 mph (50 km/h) or
more

●

When the lane width is more than approximately 8.2 ft. (2.5 m)

●

When driving on a straight road or through a curve with a radius of
more than approximately 328 ft. (100 m)

When the inside of both lane lines
turn white:

Indicates that both right and left
lane markers are recognized.

If the vehicle deviates from the
lane, the lane line on the side the
vehicle has deviated from will
flash. (



P. 453)

When the inside of either lane line
turns white:

Indicates that the lane marker on
the white-marked side is recog-
nized.

If the vehicle deviates from the side
of a lane with recognized lane
markers, the lane line will flash.
(



P. 453)

When the inside of both lane lines
are black:

Indicates that no lane markers are
recognized or the LDA system is
temporarily canceled.

Operating conditions

Indication on the multi-information display

Summary of Contents for 2008 Camry





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Camry

Reviews:

Related manuals for 2008 Camry

Brands by name

Popular brands

Toyota 2008 Camry, Owner'S Manual

Search results

Summary of Contents for 2008 Camry

Reviews:

Related manuals for 2008 Camry

Brands by name

Popular brands