Toyota 2003 Camry Page 130 Manual Download

Page: 130 / 307

’03Camry_U (L/O 0301)

126

2003 CAMRY from Jan. ’03 Prod. (OM33593U)

In the following cases, contact your Toyota

dealer:

The warning light does not come on
after the ignition key is turned to “ON”.

The warning light remains on after the
ignition key is turned to “ON”.

The warning light comes on while driv-

ing.

The “TRAC OFF” indicator light will come

on when the “VSC” warning light comes
on even if the “TRAC OFF” switch is not

pushed.

The vehicle skid control system helps

provide integrated control of the sys-

tems such as anti

−

lock brake system,

traction control, engine control, etc.

This system automatically controls the

brakes and engine to help prevent the
vehicle from skidding when cornering

on a slippery road surface or operating

steering wheel abruptly.

This system will activate when your ve-

hicle speed reaches or exceeds 15 km/h

(9 mph), and will deactivate when the ve-
hicle speed reduced to below 15 km/h (9

mph).
You may hear a sound in the engine

compartment for a few seconds when the

engine is started or just after the vehicle
begins to move. This means that the sys-

tem is in the self

−

check mode, but does

not indicate a malfunction.

CAUTION

Do not rely excessively on the ve-
hicle skid control system. Even if

the vehicle skid control system is

operating, you must always drive
carefully and attentively to avoid

serious injury. Reckless driving will

result in an unexpected accident. If
the slip indicator light flashes, an

alarm sounds, and special care

should be taken while driving.

Only use tires of specified size. The

size, manufacture, brand and tread

pattern for all 4 tires should be the
same. If you use the tires other

than specified, or different type or
size, the vehicle skid control sys-

tem may not function correctly.

When replacing the tires or wheels,
contact your Toyota dealer. (See

“Checking and replacing tires” on

page 270 in Section 7

−

2.)

In situations where the road surface

is covered with ice or snow, your

vehicle should be fitted with snow
tires or tire chains.

Vehicle skid control system

Summary of Contents for 2003 Camry




















































































































































































































































































































Search results

Summary of Contents for 2003 Camry

Reviews:

Related manuals for 2003 Camry

Brands by name

Popular brands

Toyota 2003 Camry, Manual

Search results

Summary of Contents for 2003 Camry

Reviews:

Related manuals for 2003 Camry

Brands by name

Popular brands