Toyota 2003 Camry Page 57 Manual Download

Page: 57 / 307

’03Camry_U (L/O 0301)

2003 CAMRY from Jan. ’03 Prod. (OM33593U)

The front seat belt pretensioner system

mainly consists of the following compo-
nents and their locations are shown in the

illustration.

1. Front airbag sensors
2. SRS warning light
3. Front seat belt pretensioner assemblies
4. Airbag sensor assembly

The front seat belt pretensioners are con-

trolled by the airbag sensor assembly. The

airbag sensor assembly consists of a saf-
ing sensor and airbag sensor.

When the front seat belt pretensioners are

activated, an operating noise may be

heard and a small amount of smoke

−

gas may be released. This gas is harm-

less and does not indicate that a fire is

occurring.
Once the front seat belt pretensioners

have been activated, the seat belt retrac-

tors remain locked.

CAUTION

Do not modify, remove, strike or open
the front seat belt pretensioner as-

semblies, airbag sensor or surround-

ing area or wiring. Doing so may
cause sudden operation of the front

seat belt pretensioners or disable the

system, which could result in death
or serious injury.
Failure to follow these instructions

can result in death or serious inju-
ries. Consult your Toyota dealer

about any repairs and modifications.

NOTICE

Do not perform any of the following

changes without consulting your

Toyota dealer. Such changes can

interfere with proper operation of the

front seat belt pretensioners in some

cases.

Installation of electronic devices

such as a mobile two

−

way radio,

cassette tape player or compact
disc player

Repairs on or near the front seat
belt retractor assemblies

Modification of the suspension sys-

tem

Modification of the front end struc-

ture

Attachment of a grille guard (bull

bar, kangaroo bar, etc.), snowplow,

winches or any other equipment to

the front end

Repairs made on or near the front

fenders, front end structure or con-

sole

Summary of Contents for 2003 Camry




















































































































































































































































































































Search results

Summary of Contents for 2003 Camry

Reviews:

Related manuals for 2003 Camry

Brands by name

Popular brands

Toyota 2003 Camry, Manual

Search results

Summary of Contents for 2003 Camry

Reviews:

Related manuals for 2003 Camry

Brands by name

Popular brands