Toyota 2003 Camry Page 250 Manual Download

Page: 250 / 307

’03Camry_U (L/O 0301)

246

2003 CAMRY from Jan. ’03 Prod. (OM33593U)

Aluminum wheels: Use only a mild soap

or neutral detergent.
Plastic bumpers: Wash carefully. Do not
scrub with abrasive cleaners. The bumper

faces are soft.
Road tar: Remove with turpentine or

cleaners that are marked safe for painted

surfaces.

NOTICE

Do not use organic substances (gaso-
line, kerosene, benzine or strong sol-

vents), which may be toxic or cause

damage.

3. Rinse thoroughly—dried soap can

cause streaking. In hot weather you

may need to rinse each section right

after you wash it.

4. To prevent water spots, dry the vehicle

using a clean soft cotton towel. Do not

rub or press hard—you might scratch
the paint.

Automatic car wash

Your vehicle may be washed in an auto-

matic car wash, but remember that the
paint can be scratched by some types of

brushes, unfiltered washing water, or the

washing process itself. Scratching reduces
paint durability and gloss, especially on

darker colors. The manager of the car

wash should be able to advise you wheth-
er the process is safe for the paint on

your vehicle.

Waxing your Toyota
Polishing and waxing is recommended

to maintain the original beauty of your
Toyota’s finish.

Apply wax once a month or if the vehicle
surface does not repel water well.

1. Always wash and dry the vehicle be-

fore you begin waxing, even if you are

using a combined cleaner and wax.

2. Use a good quality polish and wax. If

the finish has become extremely weath-

ered, use a car

−

cleaning polish, fol-

lowed by a separate wax. Carefully fol-
low the manufacturer’s instructions and

precautions. Be sure to polish and wax

the chrome trim as well as the paint.

Windshield washer nozzles: Make sure

that the nozzles do not become blocked

when waxing. If a nozzle becomes
blocked, contact your Toyota dealer to

have the vehicle serviced.

NOTICE

If a nozzle becomes blocked, do not
try to clear it with a pin or other

object. The nozzle will be damaged.

3. Wax the vehicle again when water

does not bead but remains on the sur-
face in large patches.

NOTICE

Always remove the plastic bumpers if
your vehicle is re

−

painted and placed

in a high heat paint waxing booth.

High temperatures could damage the
bumpers.

Summary of Contents for 2003 Camry




















































































































































































































































































































Search results

Summary of Contents for 2003 Camry

Reviews:

Related manuals for 2003 Camry

Brands by name

Popular brands

Toyota 2003 Camry, Manual

Search results

Summary of Contents for 2003 Camry

Reviews:

Related manuals for 2003 Camry

Brands by name

Popular brands