Toyota 2003 Camry Manual Download Page 229

Page: 229 / 307

’03Camry_U (L/O 0301)

225

2003 CAMRY from Jan. ’03 Prod. (OM33593U)

Do not connect it to or near any part

that moves when the engine is

cranked.

CAUTION

When making the connections, to
avoid serious injury, do not lean over

the battery or accidentally let the

jumper cables or clamps touch any-
thing except the correct battery termi-

nals or the ground.

5. Start your engine in the normal way.

After starting, run it at about 2000 rpm

for several minutes with the accelerator

pedal lightly depressed.

6. Carefully disconnect the cables in the

exact reverse order: the negative cable

and then the positive cable.

7. Carefully dispose of the battery cover

cloths—they may now contain sulfuric
acid.

8. If removed, replace all the battery vent

plugs.

If the cause of your battery discharging is

not apparent (for example, lights left on),
you should have it checked at your Toyota

dealer.

If your engine stalls while driving...

1. Reduce your speed gradually, keeping

a straight line. Move cautiously off the
road to a safe place.

2. Turn on your emergency flashers.
3. Try starting the engine again.

If the engine will not start, see “If your
vehicle will not start” on page 222 in this

section.

CAUTION

If the engine is not running, the pow-
er assist for the brakes and steering

will not work so steering and braking

will be much harder than usual.

If the engine speed does not increase when
the accelerator pedal is depressed, there may
be a problem somewhere in your electronic
throttle control system.

At this time, vibration may occur. Howev-

er, if you depress the accelerator pedal
more firmly and slowly, you can drive your

vehicle at low speeds. Have your vehicle

checked by your Toyota dealer as soon as
possible.
Even if the abnormality of the electronic
throttle control system is corrected during

low speed driving, the system may not be

recovered until the engine is stopped and
the ignition key is turned to “ACC” or

“LOCK” position.

CAUTION

Be especially careful to prevent erro-
neous pedal operation.

If your engine stalls while

driving

If you cannot increase the

engine speed

Summary of Contents for 2003 Camry




















































































































































































































































































































Search results

Summary of Contents for 2003 Camry

Reviews:

Toyota 2003 Camry, Manual, Page: 229 / 307

Search results

Summary of Contents for 2003 Camry

Reviews: