Toyota 2003 Camry Manual Download Page 74

Page: 74 / 307

’03Camry_U (L/O 0301)

2003 CAMRY from Jan. ’03 Prod. (OM33593U)

On vehicles with side airbags and
curtain shield airbags, do not allow

the child to lean against the door

or around the door even if the child
is seated in the child restraint sys-

tem. It is dangerous if the side air-

bag and curtain shield airbag in-
flate, and the impact could cause

death or serious injury to the child.

Make sure that you have complied
with all installation instructions pro-

vided by the child restraint

manufacturer and that the system is
properly secured.

A child restraint system for a small

child or baby must itself be properly

restrained on the seat with the lap por-
tion of the lap/shoulder belt. You must

carefully consult the manufacturer’s in-

structions which accompany the child
restraint system.

To provide proper restraint, use a child

restraint system following the manufactur-
er’s instructions about the appropriate age

and size of the child for the child restraint

system.
Install the child restraint system correctly

following the instructions provided by its
manufacturer. General directions are also

provided under the following illustrations.
The child restraint system should be
installed on the rear seat. According to

accident statistics, the child is safer when
properly restrained in the rear seat than

in the front seat.

CAUTION

Never install a rear

−

facing child re-

straint system on the front seat. In

the event of an accident, the force

of the rapid inflation of the airbag
can cause death or serious injury if

a rear

−

facing child restraint system

is installed on the front seat.

A forward

−

facing child restraint sys-

tem should be allowed to be

installed on the front passenger
seat only when it is unavoidable.

Always move the seat as far back

as possible, because the force of
the deploying front passenger air-

bag could cause death or serious
injury to the child.

On vehicles with side airbags and

curtain shield airbags, do not allow
the child to lean against the door

or around the door even if the child

is seated in the child restraint sys-
tem. It is dangerous if the side air-

bag and curtain shield airbag in-

flate, and the impact could cause
death or serious injury to the child.

—Child restraint system

Summary of Contents for 2003 Camry




















































































































































































































































































































Search results

Summary of Contents for 2003 Camry

Reviews:

Toyota 2003 Camry, Manual, Page: 74 / 307

Search results

Summary of Contents for 2003 Camry

Reviews: