Toyota 2003 Camry Page 120 Manual Download

Page: 120 / 307

’03Camry_U (L/O 0301)

116

2003 CAMRY from Jan. ’03 Prod. (OM33593U)

(b) Overdrive switch

You can select either third gear (with
overdrive off) or fourth gear (with over-

drive on) by pushing this switch.
To turn the overdrive off, push the switch.

The “O/D OFF” indicator light should come

on. To turn the overdrive on again, push
the switch again. The “O/D OFF” indicator

light should go off.
Always drive your vehicle with the over-

drive on for better fuel economy and

quieter driving.
If the engine is turned off when the over-

drive is off and restarted, the overdrive

will be on automatically.

Vehicles with cruise control—When the

cruise control is being used, even if you

downshift the transmission by pushing and
releasing the overdrive switch, engine

braking will not be enabled because the

cruise control is not cancelled.
For ways to decrease the vehicle speed,

see “Cruise control” on page 129 in this

section.

(c) Normal driving

1. Start the engine as instructed in “How

to start the engine” on page 208 in

Section 3. The transmission must be in

“P” or “N”.

2. With your foot holding down the brake

pedal, shift the selector lever to “D”.

When the lever is in the “D” position, the

automatic transmission system will select
the most suitable gear for running condi-

tions such as normal cruising, hill climb-

ing, hard towing, etc.
Always turn the overdrive on for better

fuel economy and quieter driving. If the

engine coolant temperature is low, the
transmission will not shift into overdrive

gear even with the overdrive on.

CAUTION

Never put your foot on the accelera-
tor pedal while shifting.

3. Release the parking brake and brake

pedal. Depress the accelerator pedal
slowly for smooth starting.

If the automatic locking operation linked
with the shift position is set, all doors are

automatically locked when the shift lever

is moved out of the “P” position with the
ignition switch is in the “ON” position and

all the doors are closed. For details, see

“—Automatic door locking and unlocking
functions” on page 19 in Section 1

−

(d) Using engine braking

To use engine braking, you can downshift

the transmission as follows:

Push the overdrive switch. The “O/D

OFF” indicator light will come on and

the transmission will downshift to third
gear.

Summary of Contents for 2003 Camry




















































































































































































































































































































Search results

Summary of Contents for 2003 Camry

Reviews:

Related manuals for 2003 Camry

Brands by name

Popular brands

Toyota 2003 Camry, Manual

Search results

Summary of Contents for 2003 Camry

Reviews:

Related manuals for 2003 Camry

Brands by name

Popular brands