Toyota 2003 Camry Page 134 Manual Download

Page: 134 / 307

’03Camry_U (L/O 0301)

130

2003 CAMRY from Jan. ’03 Prod. (OM33593U)

If you need acceleration—for example,

when passing—depress the accelerator

pedal enough for the vehicle to exceed
the set speed. When you release it, the

vehicle will return to the speed set prior

to the acceleration.

CAUTION

For manual transmission:
While driving with the cruise control

on, do not shift to neutral without

depressing the clutch pedal, as this
may cause engine racing or overrev-

ving.

CANCELLING THE PRESET SPEED

You can cancel the preset speed by:

a. Pulling the lever in the “CANCEL” di-

rection and releasing it.

b. Depressing the brake pedal.
c. Depressing the clutch pedal (manual

transmission).

If the vehicle speed falls below about 40

km/h (25 mph), the preset speed will auto-

matically cancel out.
If the vehicle speed drops 16 km/h (10

mph) below the preset speed, the preset

speed will also automatically cancel out.

If the preset speed automatically cancels

out other than for the above cases, have

your vehicle checked by your Toyota deal-
er at the earliest opportunity.

RESETTING TO A FASTER SPEED

Push the lever up in the “RES/ACC” direc-

tion and hold it. Release the lever when

the desired speed is attained. While the
lever is held up, the vehicle will gradually

gain speed.
However, a faster way to reset is to ac-
celerate the vehicle and then push the

lever down in the “SET/COAST” direction.

RESETTING TO A SLOWER SPEED

Push the lever down in the “SET/COAST”

direction and hold it. Release the lever
when the desired speed is attained. While

the lever is held down, the vehicle speed
will gradually decrease.
However, a faster way to reset is to de-

press the brake pedal and then push the
lever down in the “SET/COAST” direction.

On vehicles with automatic transmission,

even if you turn off the overdrive switch,

with the cruise control on, engine braking
will not be applied because the cruise

control is not cancelled. To decrease the

vehicle speed, reset to a slower speed
with the cruise control lever or depress

the brake pedal. If you use the brake

pedal, cruise control is cancelled.

RESUMING THE PRESET SPEED

If the preset speed is cancelled by pulling
the control lever or by depressing the

brake pedal or clutch pedal, pushing the

lever up in the “RES/ACC” direction will
restore the speed set prior to cancellation.
However, once the vehicle speed falls be-

low about 40 km/h (25 mph), the preset
speed will not be resumed.

CRUISE CONTROL FAILURE WARNING

If the “CRUISE” indicator light in the

instrument cluster flashes when using the
cruise control, press the “CRUISE ON

−

OFF” button to turn the system off and

then press it again to turn it on.
If any of the following conditions then oc-

curs, there is some trouble in the cruise

control system.

Summary of Contents for 2003 Camry




















































































































































































































































































































Search results

Summary of Contents for 2003 Camry

Reviews:

Related manuals for 2003 Camry

Brands by name

Popular brands

Toyota 2003 Camry, Manual

Search results

Summary of Contents for 2003 Camry

Reviews:

Related manuals for 2003 Camry

Brands by name

Popular brands