Toyota 2003 Camry Page 129 Manual Download

Page: 129 / 307

’03Camry_U (L/O 0301)

125

2003 CAMRY from Jan. ’03 Prod. (OM33593U)

TRACTION CONTROL OFF MODE
When getting the vehicle out of mud or
new fallen snow, etc., turn off the trac-

tion control system. This system that
controls engine performance interferes

with the process of freeing front

wheels.
To turn off: Push “TRAC OFF” switch.

The “TRAC OFF” indicator light will come
on.
The vehicle skid control system is always

activated, even if the traction control sys-
tem is turned off.

To turn on: Push “TRAC OFF” switch
once again.

The “TRAC OFF” indicator light will go off.

“TRAC OFF” indicator light comes on for

a few seconds when the ignition key is

turned to “ON”. It will come on again
when you push the “TRAC OFF” switch to

turn off the system.
In the following cases, contact your Toyota
dealer:

The indicator light does not come on
when the ignition key is turned “ON”.

The indicator light remains on after the

ignition is turned on.

The indicator light comes on with the

normal driving mode while driving.

“VSC” warning light

This light warns that there is a problem
somewhere in the traction control system

or the vehicle skid control system.
The light will come on when the ignition

key is turned to “ON” and will go off after

a few seconds.
If the light comes on while driving, the

system does not work. However, as con-
ventional braking operates when applied,

there is no problem to continue your driv-

ing.

Summary of Contents for 2003 Camry




















































































































































































































































































































Search results

Summary of Contents for 2003 Camry

Reviews:

Related manuals for 2003 Camry

Brands by name

Popular brands

Toyota 2003 Camry, Manual

Search results

Summary of Contents for 2003 Camry

Reviews:

Related manuals for 2003 Camry

Brands by name

Popular brands