Toyama TDWT73(E), Manual

Page: 29 / 56

29
11. OPERATING MICRO TRATOR
PREPARING BEFORE OPERATION AND ENGINE OPERATION
•
Inspect the lubricating oil, fuel, water level, check the battery (not included) and make all
the necessary preparations before starting the engine, following the instructions in the
engine operation manual.
Combustível - Diesel filtered
The fuel in the tank must be filtered or allowed to settle for at least 48 hours.
Do not fill the tank with fuel while the engine is running.
If the tractor is working under strong sun, do not refill fuel into the tank mouth as it may overflow
due to swelling. If overflow, then clean to avoid fire.
Always keep the fuel filter clean. Change fuel filter within the time indicated in the manual.
Radiator Water
Must be clean water. The most suitable water is rain, river or boiled water after waiting for
sedimentation.
Batery (bateria não included)
Make sure your tractor battery is sealed. If it is, it does not need to be replaced. Be careful
about handling the battery, check the manufacturer's instructions.
•
b) Inspect the oil level in the main housing and in the gearbox of the rotary spindle.
•
c) Since the air filter comes from the factory without oil, fill it with engine oil (SAE 15W-
40 or 20W-40).
•
d) Inspect all nuts and bolts for tightness.
•
e) Place the control handle in the disengaged position, the gear lever and the throttle in
the neutral position.
•
f) Put the rest pedestal down to support the micro tractor.
•
g) switch on the engine according to the operating instructions.
Fig. 8
– Pedestal down
Fig.9: Pedestal up