tousek
/ EN_GTZ-Digital_07 / 10. 10. 2019
- 11 -
4.3 Control connections
u
Monting
Risk of death through electric shock hazard!
• Before commencing cabling works please disconnect the operator system from the power supply
• Make sure that the power supply remains disconnected during cabling works.
Material damage due to improper installation of the actuator!
An external voltage at the terminal K results in the destruction of whole electronics.
• Connect to the terminals 1, 2 and 4 (K) only potential free contacts.
4.3.1 Overview of control connections
Connection
K
– External control elements
– Photocell, stop switch, accessories
„Level 5, Menu 1 - Programmable impulse input
(clamp 1/2)“
„4.3.2 Connection on terminal K“
E
Connection MS-BUS for extension modules:
- safety edges module (optional)
„Level 8, Menu 2 - safety sensing edge
FE
Connection radio receiver RS 868-GTZ
„4.3.3 connection receiver“
1.
2.
3.
Ø 10
2x
2x
2x
2/3
1/3
K
E
FE
preinstalled