tousek
/ EN_GTZ-Digital_07 / 10. 10. 2019
- 25 -
7. Maintenance
GTZ 55, 110 Digital
To ensure fault-free operation, the door system must be inspected regularly and, if necessary, be repaired.
Before starting work on the door system, the operator system must always be disconnected from the power supply.
• • Check once a month that the operator system reverses when the door touches an obstacle. To check this, place an obstacle,
50 mm in height, in the path of the door in the travel direction.
• Check the settings of the automatic cut-out in the OPEN and CLOSE directions.
„5.5.2 Checking the automatic switch-off“
• Check all the moving parts of the door system and door operator system.
• Check the door system for signs of damage or wear and tear.
• Move the door manually to check that the door travels easily and smoothly.
Care and cleaning
Danger!
Mortal danger due to electric shock!
• Before cleaning the operator system must be necessarily disconnected from the power supply.
Make sure that the power supply remains diconnected while cleaning.
Note
Damage resulting from incorrect operation!
When cleaning the operator system, never use: direct water jets, high pressure cleaners, acids or alkaline solutions...
• Clean the outside of the housing using a damp, soft cloth that doesn‘t shed fibres.
• In case of severe dirt the housing can be cleaned using a mild detergent.
8. Disassembly
GTZ 55, 110 Digital
The dismantling must be carried out by qualified personnel only and is made the other way around mounting.
Danger!
Mortal danger due to electric shock!
• Before dismantling the operator system must be necessarily disconnected from the power supply.
Make sure that the power supply remains disconnected while dismantling.
Warning: Risk of serious injury due to falling components!
• Before dismantling the operator system, secure it to prevent it from falling.
• Strictly follow all the applicable health and safety regulations.
9. Disposal
GTZ 55, 110 Digital
Do not dispose of old equipment or batteries with the normal household waste!
• Dispose of old devices at a waste collection centre for electronic waste or via your specialist dealer.
• Dispose of old batteries in a battery recycling container or via a specialist dealer.
• Dispose of the packaging material in the special waste collection containers for paper, cardboard and plastic.
