TouchTunes Barfly TV, Installation And Setup Manual

Page: 74 / 96

62
Transmitter and Receiver Front and Rear panels
1. HDMI IN: Connect to a HDMI source with a HDMI male-male cable [P/N: 300423-036].
2. MODE: 0 = HDMI mode with surround sound audio output.
• 1 = HDMI mode with stereo audio output
• 2 = DVI mode
• 3~5 = Reserved
• 6 = Use default EDID*
• 7 = Learn the EDID from the display
3. +5V DC: Connect to 5V DC power supply unit [P/N: 700229-001].
4. HDMI Signal OUT: Plug in a CAT5e/6 cable and link to the receiver unit’s RJ-45
connector.
5. +5V DC: Connect to 5V DC power supply unit [P/N: 700229-001].
6. HDMI Signal IN: Plug in a CAT5e/6 cable and link to the transmitter unit’s RJ-45
connector.
7. Signal Level: Use the screw driver to adjust the 8-level signal equalization control to the
received HDMI signals. The HDMI signal level varies from 0 (strongest) to 7 (weakest) for
respective transmission length from longest possible range to short distance. Please dial
the Signal Level from 7 to 0 and stop turning the rotary switch whenever the audio/video is
playing normally.
Inappropriate signal level setting may cause overpowering issue that would shorten the
product life significantly!
8. HDMI OUT: Connect to a HDMI display with a HDMI male-male cable [P/N: 300423-
036].
2 1
5 6
3 4
7 8