TouchTunes Barfly TV, Installation And Setup Manual

Page: 26 / 96

14
Installing Barfly
If your video source is equipped with an RF coaxial output:
Note:
RF will support HD if an ATSC or QAM tuner is used.
1. Connect one end of a coaxial cable to the RF output on your video source.
2. Connect the other end of the cable to the RF input on the tuner.
3. Connect the output from the tuner to the scaler, as shown in the following figure.
Source with RF Output
If Audio is Required at the TV...
Barfly is a video-only system. In the majority of venues, audio is sent to a centralized sound
system (as bars can be loud places) or turned off altogether as there are typically many
sources of video playing at the same time.
Video Source
RF cable
Tuner (rear panel)
S-Video/Component
cables
Output
(on front panel)
Com ponent to DVI
cable