Other Mounting Options
Extron provides a range of mounting kits for the TLP Pro 520M and TLC Pro 521M. These
allow the touchpanel to be mounted on glass surfaces, desktops (fixed or swivel mount), rack
mounted (see below for important guidelines about rack mounting), and wall mounted, with a
wall box.
See
www.extron.com
for the complete range of mounting options.
To mount the TLP Pro 520M or TLC Pro 521M, follow the instructions provided with the kit.
Underwriters Laboratories Guidelines for Rack Mounting
The following Underwriters Laboratories (UL) guidelines are relevant to the safe installation of
these products in a rack:
•
Elevated operating ambient temperature
— If the unit is installed in a closed or
multi-unit rack assembly, the operating ambient temperature of the rack environment
may be greater than room ambient temperature. Therefore, install the equipment in an
environment compatible with the maximum ambient temperature (Tma: +122 °F, +50 °C)
specified by Extron.
•
Reduced air flow
— Install the equipment in the rack so that the equipment gets
adequate air flow for safe operation.
•
Mechanical loading
— Mount the equipment in the rack so that uneven mechanical
loading does not create a hazardous condition.
•
Circuit overloading
— Connect the equipment to the supply circuit and consider the
effect that circuit overloading might have on overcurrent protection and supply wiring.
Give appropriate consideration to the equipment nameplate ratings when addressing this
concern.
•
Reliable earthing (grounding)
— Maintain reliable grounding of rack-mounted
equipment. Pay particular attention to supply connections other than direct connections to
the branch circuit (such as the use of power strips).
TLP Pro 520M and TLC Pro 521M • Mounting
25
Summary of Contents for TLC Pro 521M
Page 6: ......
