DNS
server
address.
a.
Press the button for the address to be edited. A screen opens, showing the
address and a numerical keypad.
IP Address
1 9 2
1 6 8
2 5 4
2 5 1
Back
0
1
4
7
3
6
9
8
5
2
Clear
Cancel
OK
Figure 12.
Numerical Keypad for Setting IP Addresses
b.
Press
Clear
to remove the old address. If you start typing without pressing
Clear
, the first octet is overwritten and the other octets remain the same.
c.
Click any octet button to start editing that octet.
d.
Enter a 3-digit value for the octet (leading zeroes in the octet are ignored).
NOTE:
Octets can have any value between
0
and
255
. If you attempt to enter an
invalid number, for example
892
, you are able to enter the
89
but the
2
cannot
be entered.
Click
Back
to correct the last digit entered. If no value has been entered for the
selected octet, clicking
Back
moves the cursor back to the previous octet and
deletes the last digit of that octet.
e.
Click the next octet button and enter a value.
f.
Repeat steps c-e until values have been entered for all four
octets.
g.
Press
OK
to save the changes and return to the
Network
screen or press
Cancel
to return to the
Network
screen
without saving the changes.
4.
If you have changed any of the values in the
Network
screen, the background color of the
button changes to blue (as shown in the figure to the right). Click
Apply
to apply the new
values or
Revert
to return to the previous values without saving the changes. The buttons
change back to gray.
If you have not made any changes, the
Apply
and
Revert
buttons are grayed out.
0.0.0.10
TLP Pro 520M and TLC Pro 521M • On-screen Menus
16
Summary of Contents for TLC Pro 521M
Page 6: ......
