Toshiba TLP-WX200, Owner'S Manual

Page: 51 / 53

100 101
Other
s
List of supported signals (Computer input)
This projector supports the following RGB signals. Note, however, that depending on the
computer model, the screen may show flicker or streaking. Please adjust the projector if
this happens.
Resolution Mode
Refresh rate
(Hz)
H-frequency
(kHz)
Clock
(MHz)
70 x 400 70x400_85 85.09 7.97 5.500
640 x 480 VGA_60 59.940 1.469 5.175
VGA_7 7.809 7.861 1.500
VGA_75 75.000 7.500 1.500
VGA_85 85.008 4.69 6.000
800 x 600 SVGA_56 56.50 5.156 6.000
SVGA_60 60.17 7.879 40.000
SVGA_7 7.188 48.077 50.000
SVGA_75 75.000 46.875 49.500
SVGA_85 85.061 5.674 56.50
8 x 64 MAC16" 74.550 49.75 57.8
104 x 768 XGA_60 60.004 48.6 65.000
XGA_70 70.069 56.476 75.000
XGA_75 75.09 60.0 78.750
XGA_85 84.997 68.667 94.500
MAC19" 74.700 60.14 79.857
115 x 864 SXGA1_75 75.000 67.500 108.000
* 180 x 800 WXGA_60 59.880 49.580 8.00
180 x 960 QuadVGA_60 60.000 60.000 108.000
QuadVGA_85 85.00 85.98 148.500
180 x 104 SXGA_60 60.00 6.981 108.000
SXGA_75 75.05 79.976 15.000
SXGA_85 85.04 91.146 157.500
1400 x 1050 SXGA+ 59.978 65.17 11.750
1600 x 100 UXGA_60 60.000 75.000 16.000
UXGA_65 65.000 81.50 175.500
UXGA_70 70.000 87.500 189.000
UXGA_75 75.000 9.750 0.500
UXGA_85 85.000 106.50 9.500
* : 180 x 800 is only available for WX00
Note
Signals whose resolution exceeds the native resolution mentioned below will be compressed.
For this reason, some information may be lost and/or image quality may be affected.
X00 : 104 × 768 dots
WX00 : 180 × 800 dots

•
List of supported signals (Y/P
B
/P
R
input)
Signal format fh(kHz) fv(Hz)
480i(55i)@60Hz 15.7 59.94
480p(55p)@60Hz 1.47 59.94
576i(65i)@50Hz 15.6 50.00
576p(65p)@50Hz 1.5 50.00
70p(750p)@60Hz 45.00 60.00
70p(750p)@50Hz 7.50 50.00
1080i(115i)@60Hz .75 60.00
1080i(115i)@50Hz 8.1 50.00
1080p(115p)@60Hz 67.50 60.00
1080p(115p)@50Hz 56.5 50.00
List of supported signals (Video, S-Video input)
Video mode fh(kHz) fv(Hz) fsc(MHz)
NTSC 15.7 60 .58
PAL 15.6 50 4.4
SECAM 15.6 50 4.5 or 4.41
PAL-M 15.7 60 .58
PAL-N 15.6 50 .58
PAL-60 15.7 60 4.4
NTSC4.4 15.7 60 4.4
List of supported signals (HDMI input)
Since the resolutions or frequencies input from a computer or picture device vary and may
be different from the signals listed below, the images may not appear correctly or some
signal formats may not be detected properly and even it may fail to display the images. If that
happens, set your computer or the device so that an input signal listed below can be received.
Resolution Mode
Refresh rate or
V-frequency (Hz)
H-frequency
(kHz)
Clock
(MHz)
70 x 480 480p(55p) 59.94 1.469 7.000
70 x 576 576p(65p) 50.00 1.50 7.000
180 x 70
70p(750p) 60.00 45.000 74.50
70p(750p) 50.00 7.500 74.50
190 x 1080
1080i(115i) 60.00 .750 74.50
1080i(115i) 50.00 8.15 74.50
1080p(115p) 60.00 67.500 148.50
1080p(115p) 50.00 56.50 148.50
640 x 480
VGA_60 59.940 1.469 5.175
VGA_7 7.809 7.861 1.500
VGA_75 75.000 7.500 1.500
800 x 600
SVGA_60 60.17 7.879 40.000
SVGA_7 7.188 48.077 50.000
SVGA_75 75.000 46.875 49.500
104 x 768
XGA_60 60.004 48.6 65.000
XGA_70 70.069 56.476 75.000
XGA_75 75.09 60.0 78.750
* 180 x 800 WXGA_60 59.880 49.580 8.00
180 x 104 SXGA_60 60.00 6.981 108.000
1400 x 1050 SXGA+ 59.978 65.17 11.750
* 180 x 800 is only available for WX00



Specifications (Continued)