Toshiba TLP-WX200, Owner'S Manual

Page: 19 / 53

36 37
Operations
Using the menus 1
You can call up on-screen menus, and conduct a number of adjustments and settings using
the
MENU
button
p.16
on the control panel of the main unit and remote control.
Setup using the Setting display
The menu shown below is for operation instructions purposes and might differ from the
actual display.
These marks
signify that there
are options.
Press or
to display a list of
options.
* When no item is
changed, press .
These marks signify
that there are setting
screens. Press or
to display a list of
setting screens.
Toggle items with .
Select items with and press .
Fix selection with .
This will display the Setting display menu.
1. Press the MENU button
2. Select a Category
3. Adjustments & Settings
• The figure shows displays given for operation instructions purposes. As the display may differ depending
on the item, refer to the following applicable pages for the menu item you desire.
• To return to previous item, press the RETURN button.
• When Network or USB memory input is selected, pressing the MENU button twice displays the Setting
display (2) menu.
Item
Adjustment/Setting Value
These marks signify
the items can be
adjusted/set by using
.
These marks signify the items can
be selected from the list by using
.
After an item is selected, apply it by
pressing .
Press or to open the menu.
4. End Press the MENU button once more.
(The menu will disappear automatically after 30 seconds, if no operation is conducted.)
Select a category by using .
There are 5 categories:
Displays the current
adjustments and
settings of the selected
category.
Items shown in gray
cannot be adjusted with
the current input source.
p.37 Image adjustment menu
p.39 Display setting menu
Default setting 1 menu p.42
Default setting 2 menu p.43
Status display menu p.45
■
The image adjustment menu
Use this menu to set or adjust image related items. Items that can be set or adjusted
are marked “Yes”, and those that cannot are marked “No”. (When an item is masked, it
indicates that you cannot select it using the current input.)
Item Description Computer Y/P
B
/P
R
HDMI Video S-video Network USB memory
Contrast
Adjust the image contrast.
Lower Higher
Yes Yes Yes Yes Yes Yes Yes
Brightness
Adjust the brightness of the image.
Darker Brighter
Yes Yes Yes Yes Yes Yes Yes
Color
Adjust the color of the image.
Lighter Deeper
No Yes No Yes Yes No No
Sharpness
Adjust the sharpness of the image.
Softer Sharper
Yes No Yes Yes Yes No Yes
Noise
reduction
*1
Set the function to reduce
screen noise.
On (Enable) Off (Disable)
No Yes No Yes Yes No No
NCE
Switches the picture mode.
Press
. Toggle the NCE
mode with . See p.33
for details.
Yes Yes Yes Yes Yes Yes Yes
R–level
Adjust red of the image color.
Less red More red
Yes Yes Yes Yes Yes Yes Yes
G–level
Adjust green of the image color.
Less green More green
Yes Yes Yes Yes Yes Yes Yes
B–level
Adjust blue of the image color.
Less blue More blue
Yes Yes Yes Yes Yes Yes Yes
NTSC
mode
*2
Set the black level with .
US : NTSC (US) mode
JAPAN : NTSC (JAPAN) mode
No No No Yes Yes No No
RGB input
range
*3
Set the RGB input range with
.
Standard : When black color
becomes lighter.
Full : When dark area
becomes too dark.
No No Yes No No No No
Auto
setting
Automatically adjusts items
such as the sampling phase
depending on the type of
input signal.
Yes No No No No No No
Equalizer Reduce noise on the screen.
Adjust with
.
No No Yes No No No No
■
Note
Menu adjustments and settings will not be saved, if the power cable is disconnected or
the power goes out before the adjustments and settings have been completed and the
menu display has been closed. •