70
71
Netw
ork/
USB memor
y
Displaying computer’s screens via projectors using the
Multiscreen function
1
Launch the Network Utility
software application.
The
Screen Image
transmission mode window
appears on the computer’s screen.
2
Click the Multiscreen icon
.
The
Network Utility
window changes to
Multiscreen
transmission mode.
3
Select Transmission mode.
Click
Update automatically
or
Update manually
. See step
7
for the descriptions of
Update automatically
and
Update manually
.
4
Click the Advanced button.
The
Multiscreen: Advanced Settings
dialog
appears. Set the dialog as shown below, as
necessary.
Window Display
Select the
Place in Tasktray at the start
of transmission
checkbox to iconify the
Network Utility
and place it in the computer’s
tasktray when transmission initiated.
To display the window, double click this icon,
or right click and select
Open
from the popup
menu. Even with the
Network Utility
window
minimized, you can use the pop-up menu to
stop or resume transmission.
Transmission Mode (Image)
Selecting
High quality
improves the
quality of the projected image, but lowers
communication speed. Selecting
High speed
has the opposite effect.
Transmission Mode (Sound)
Check the
Transmit sound to a projector (Only when connected with one
projector)
checkbox to transmit the sound being played on a computer to the
projector.
Note: The sound can be sent when only one projector is connected.
•
•
•
Network Mouse Controller
Check the
Control computer mouse pointer using remote control (Only when
connected with one projector)
checkbox to control computer mouse pointer
with
Mouse control
button,
PAGE+
button,
PAGE -
button,
L-CLICK
button and
R-CLICK
button of the computer’s remote control.
Note 1: This function is available when only one projector is connected to computer.
Note : When you use the Network Mouse Controller function, do not connect the
mouse remote control receiver to your computer. The function will fail to
operate properly.
5
Arrange the virtual display
layout.
a
Clicking the
Display Properties
button in
the Control window displays the window for
screen display settings.
b
Right click the desired virtual display
(Toshiba DPJ Secondary Display Driver) and
select
Attached
from the popup menu.
c
Allocate screen displays by drag and drop of
monitor icons.
d
Click
OK
button in the window for screen
display settings, then the
Screen Layout
in the Control window will be updated
accordingly.
When you check
Switch to the last
screen settings when using next time
the virtual display layout that has been set
will be memorized upon exit from
Network
Utility
and it will switch to the screen settings
the next time you use the Multiscreen feature.
•
Using the Network Utility (Continued)
Summary of Contents for TLP-WX200
Page 53: ......
