Toshiba Tecra M10 Maintenance Manual Download Page 223

Page: 223 / 474

3.31 SETUP

3 Tests and Diagnostics

TECRA M10 Maintenance Manual (960-685)

[CONFIDENTIAL]

3-95

(c)

USB Memory BIOS Support Type

A setup about the USB flash memory used for a startup of a computer.

HDD

The priority as HDD turns into ranking of HDD in "BootPriority"
in a USB flash memory. The priority with other HDD can be set up
by "HDD Priority."

(Default)

FDD

A USB flash memory is treated as FDD. The priority as a drive to
start turns into ranking of FDD in "Boot Priority."

14.

PCI LAN

This option sets the Enable / Disable of the built-in LAN functions.

Enabled

Enables built-in LAN functions. (Default)

Disabled

Disables built-in LAN functions.

15.

Security Controller

(c)

TPM

Disables the security controller called TPM (Trusted Platform Module).
When the cursor is on the

Enable

(

Disable

) and the

Space

is pressed,

message is displayed and the PC waits

key input by the user.

When Y is pressed, it is sets to

Enable

(

Disable

). After changing, the cursor

could not be moved on the

TPM

tem. This option can be changed after

rebooting.

Disabled

Disables

the

TPM.

(Default)

Enabled

Enables

the

TPM.

(d)

Hide TPM

Yes

It prevents from checking TPM on Windows.

It enables it to check TPM on Windows (Default).

In order to set "TPM" as "Enabled", please set "Hide TPM" as "No" first.
Moreover, if it is set as "Yes", TPM cannot be checked on Windows.

16.

Intel( R )AMT

*AMT model only

(a) MEBx SETUP

This setting enables or disables the computer's MEBx SETUP Intel(R) AMT.

Enabled

Enables the MEBx SETUP.

Disabled

Disables the MEBx SETUP. (Default)

Summary of Contents for Tecra M10



























































































































































































































































































































































































































































































Search results

Summary of Contents for Tecra M10

Reviews:

Related manuals for Tecra M10

Brands by name

Popular brands

Toshiba Tecra M10, Maintenance Manual

Search results

Summary of Contents for Tecra M10

Reviews:

Related manuals for Tecra M10

Brands by name

Popular brands