Toshiba TEC EM1-31074 Owner'S Manual Download Page 78

Page: 78 / 94

14-15

14. OPERATING PROCEDURES

14.9 SELECTING PRINT ITEM AND ADJUSTING THE LCD BRIGHTNESS

NOTES: 1. A store code can be printed in place of a ‘packed on date’ and ‘sell by date’ by changing the

initial settings #6-5 and #6-6.
To print a store code, select ‘packed on date’ or ‘sell by date’ as a print item using the above
procedure.

2. Setting data will not be changed by turning the power off, changing the mode or calling a

PLU.

3. The 0 key has no function.

4. Pressing the C key allows you to return to the step of selecting the ‘packed on date’.

5. The range of idle time = 0 to 99 seconds. A setting ‘0’ prohibits display of an auto message.

6. Item 29 is operable only when the initial setting #1-5 is set to ‘0’.

7. Be sure to press the FEED key after the PRT/* key when changing the label format.

14.10 DATE CHANGE

The date can be changed temporarily.

Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH, FIX, or BY COUNT

DT/TM

PRT

Enter the new date.
(Ex. Dec. 18, 1994)

Month

Day

Year

NOTE: The scale will check the details of the date input. An invalid date will result in an error.

Liquid Crystal Display

DONUTS

121894

Press:

Summary of Contents for TEC EM1-31074































































































Search results

Summary of Contents for TEC EM1-31074

Reviews:

Related manuals for TEC EM1-31074

Brands by name

Popular brands

Toshiba TEC EM1-31074, Owner'S Manual

Search results

Summary of Contents for TEC EM1-31074

Reviews:

Related manuals for TEC EM1-31074

Brands by name

Popular brands