Toshiba TEC EM1-31074 Owner'S Manual Download Page 40

Page: 40 / 94

11-14

11. PROGRAMMING PROCEDURES

11.5 PLU VERIFYING LABEL

11.5

PLU VERIFYING LABEL

Normal Mode

ESB Limited Spec. Mode

Menu Group: 1

Item No.: 12

Item No.:

PLU data stored in the scale are verified in the following procedure.

NOTES:

1. Labels are printed in both batch mode and on-demand mode.

2. When no PLU is stored in the selected range, an error occurs when the ENTER key is pressed.

3. Pressing the CLEAR key releases the scale from the error mode and returns to the initial status

of this menu.

4. After clearing a paper jam error, the scale will wait for an entry of PLU# again.

<MENU>

Group 1

PLU

ENTER

CLEAR

PROG.

ESC.

ENTER

The
confirmation
label is issued.

<MENU>

Group 1

Main

<MENU>

Set the entire PLU#.

Set the individual PLU#. (Ex. PLU #100)

Set the block PLU#. (Ex. PLU #100~199)

Set the zone PLU#. (Ex. PLU #100~108)

To interrupt
label issue.

To resume label issue
which has been interrupted.

Summary of Contents for TEC EM1-31074































































































Search results

Summary of Contents for TEC EM1-31074

Reviews:

Related manuals for TEC EM1-31074

Brands by name

Popular brands

Toshiba TEC EM1-31074, Owner'S Manual

Search results

Summary of Contents for TEC EM1-31074

Reviews:

Related manuals for TEC EM1-31074

Brands by name

Popular brands