Toshiba TEC EM1-31074 Owner'S Manual Download Page 25

Page: 25 / 94

9-2

9. REMOVAL AND REPLACEMENT OF MEDIA

9. REMOVAL AND REPLACEMENT OF MEDIA

Loosen the P-2.6x6 screw and move the label guide plate according to the media width.

Secure the label guide plate with the P-2.6x6 screw.

NOTE: After replacing the media, press the feed key to confirm that the media is issued correctly.

*Use of other model’s label cassette in the SL-9000 may cause a label skew.

NOTE: Ensure that the label guide plate aligns with the dowel.

Refer to the figure below and set the media on the label cassette.

Insert the roll stopper into the media core fully.

Set the backing paper stopper in the proper orientation.

Assemble the label cassette to the scale and remove slack of the media.
Push down the print head, and close the right cover.

Backing Paper Stopper

Label Guide Plate

Screw (P-2.6x6)

48-mm label dowel

57-mm label dowel

Label or Report Paper

Roll Stopper

Label

Roll Stopper

Summary of Contents for TEC EM1-31074































































































Search results

Summary of Contents for TEC EM1-31074

Reviews:

Related manuals for TEC EM1-31074

Brands by name

Popular brands

Toshiba TEC EM1-31074, Owner'S Manual

Search results

Summary of Contents for TEC EM1-31074

Reviews:

Related manuals for TEC EM1-31074

Brands by name

Popular brands