Toshiba T90S3S08KS6XSN Manual Download Page 151

Page: 151 / 153

TOSHIBA G9000 UPS White Paper

Page 11

/toshiba02/User2/UPSMKT/GENERAL/UPS/3 Phase Systems/White Papers/G9000 White Paper - multi-level converter.doc

UPSG9000WP081201

G9000 UPS Benefits

As the world’s first three-level uninterruptible power supply, the G9000

UPS is the wise response from Toshiba to the growing demand for high

reliability and efficient power solution for mission-critical applications. Its

innovative three-level circuit concept and exclusive power module delivers

superior performance and reliability, updates industrial electronics

technology and reduces cost of ownership with its green-oriented features.

The many benefits of the G9000 UPS include:

Industry-leading and up-to-date power electronics technology

The G9000 UPS is the most advanced uninterruptible power supply.

Advances comprise all the three levels in power electronics: circuits,

components, and systems. The innovative three-level circuit concept

is a milestone in the UPS industry, which has stagnated to the

conventional two-level topology. The exclusive power module has

become a key component to make the multilevel concept even more

attractive. In terms of advances in systems, DSP

-based fully digital

control ensures superior performance to meet modern industry

demands and standards. In addition, The G9000 UPS introduces a

cross current sensor less control for parallelism of multiple modules.

This new technology eases the system expansion toward a redundant

high-reliability configuration.

Green-oriented design

With an unmatched efficiency of 96.5% at full load, The G9000 UPS

is the greenest double-conversion UPS on market while competitors

barely reaches 95%. This high efficiency leads to significant energy

savings as well as reduction of the carbon footprint. To illustrate the

amount of energy savings, consider two 225-kVA systems running at

40% load. The impressive double conversion efficiency curve (Figure

13) of the G9000 UPS shows >96% efficiency even at this load

percentage. In this case, an increase of 1% in efficiency represents

Digital signal processor

G9000

UPS includes

advances in all the

three levels in power

electronics: circuits,

components and

systems.

G9000 UPS features

industry -leading

double conversion

efficiency (>96%).

Summary of Contents for T90S3S08KS6XSN


























































































































































Search results

Summary of Contents for T90S3S08KS6XSN

Reviews:

Related manuals for T90S3S08KS6XSN

Brands by name

Popular brands

Toshiba T90S3S08KS6XSN, Manual

Search results

Summary of Contents for T90S3S08KS6XSN

Reviews:

Related manuals for T90S3S08KS6XSN

Brands by name

Popular brands