manualshive.com logo in svg

Toshiba T3400, Maintenance Manual

Share
Download
Toshiba T3400 Maintenance Manual Download Page 97

3-54

 T3400, T3400CT

(c)

Ext. FDD/PRT

Use this option to assign a printer/FDD port function.

Printer

Configures the port for output to a printer or other
parallel device.  (This is the default.)

FDD A

Configures the port for output and input to and from the
external 5.25-inch diskette drive and assigns the letter A
to the external drive. The internal drive becomes drive B
by default.

FDD B

Configures the port for output and input to and from the
external 5.25-inch diskette drive and assigns the letter B
to the external drive.  By default the internal drive
remains drive A.

Option Setting

External FDD ID

Internal FDD ID

Printer (default)

None

A

FDD A

A

B

FDD B

B

A

(d)

Printer Port Type

This option sets the communication mode for the printer/FDD port to either
output-only or bi-directional.  It is effective only when the Ext.FDD/PRT
option is set to printer.  If FDD is selected, this setting is ignored and the
mode is set to bi-directional.  For most printers, the port should be set to
Output.  With some other parallel devices, the setting should be Bi-direc-
tional.

Output

Activates uni-directional operation.
 (This is the default)

Bi-directional

Activates bi-directional operation.

4.

Hard Disk

This option enables or disables the HDD.

120 MB

The hard disk can be accessed.  Disk

 

capacity is automatically

displayed and cannot be changed.

No Drive

The hard disk cannot be accessed.

Summary of Contents for T3400




















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands