4-16
T3400, T3400CT
Installation
To install the HDD, follow the steps below and refer to Figures 4-11 through 4-13.
1.
Seat the HDD in its bracket (Figure 4-13).
2.
Secure the HDD to the bracket with
four M3x4 flat-head screws
(Figure 4-13).
3.
Fit the HDD flexible cable under three latches on the
bracket
(Figure 4-12).
4.
Connect the
flexible cable
to the HDD (Figure 4-12).
5.
Secure the flexible cable with
one M2.5x4 brass screw
(Figure 4-12).
6.
Seat the HDD into the bottom cover (Figure 4-11).
7.
Connect the
flexible cable
to
PJ5
on the system board (Figure 4-11).
8.
Secure the HDD with
one M2.5x6 brass screw
(Figure 4-11).
9.
Replace the top cover, optional PCMCIA card, optional memory card, and battery
pack as described in sections 4.5 through 4.2.
Summary of Contents for T3400
