manualshive.com logo in svg

Toshiba T3400, Maintenance Manual

Share
Download
Toshiba T3400 Maintenance Manual Download Page 23

2-6

T3400/T3400CT Maintenance Manual

Procedure 2

Battery LED Indicator Check

The battery LED indicator shows battery charging status.  The LED, identified by a battery
icon on the front of the computer, glows orange when the AC adapter is charging the battery
pack.

❑

If the indicator glows green, the AC adapter is connected and the battery is fully
charged.

❑

If the indicator glows orange, the AC adapter is connected and the battery is being
charged.

❑

If the indicator does not glow, go to Check 1.

Check 1

Make sure the AC adapter cable and AC cord are firmly plugged into the DC IN
socket and wall outlet. If connected correctly, go to Check 2.

Check 2

Make sure the battery pack is installed correctly.  Go to Check 3 if it is.

Check 3

Remove the battery pack and check that the battery terminal is clean and not bent.

❑

If the terminal appears dirty, clean gently with a cotton swab dipped in
alcohol.

❑

If the terminal looks bent or damaged, replace the bottom of the system
board.

❑

If the battery terminal is clean and not bent, go to Check 4.

Check 4

Connect a new AC adapter.  If the indicator does not glow, go to Check 5.

Check 5

Install a new battery pack.  If the indicator does not glow, go to Procedure 3.

Summary of Contents for T3400




















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands