manualshive.com logo in svg

Toshiba T3400, Maintenance Manual

Share
Download
Toshiba T3400 Maintenance Manual Download Page 89

3-46

 T3400, T3400CT

2.

FORMAT program

(a)

Select FORMAT to display the following message:

DIAGNOSTICS - FLOPPY DISK FORMAT : VX.XX

Drive number select (1:A, 2:B) ?

(b)

Select a drive number to display the following message:

Type select (0:2DD-2DD,1:2D-2D,2:2D-2HD,3:2HD-2HD) ?

(c)

Select a media/drive type number and press 

Enter 

to display a message

similar to the one below:

Warning : Disk data will be destroyed.

Insert work disk into drive A:
Press any key when ready.

(d)

Remove the Diagnostics Disk from the FDD, insert the work disk, and press
any key.

The following message will be displayed when the FDD format is executed:

[ FDD TYPE ] : TRACK  = XXX
[ FDD TYPE ] : HEAD   = X
[ FDD TYPE ] : SECTOR = XX

Format start

[[track, head = XXX X]]

After the floppy disk is formatted, the following message will appear:

Format complete
Another format (1:Yes/2:No) ?

(e)

Type 

1

 to display the message from step (c) above.  Type 

2

 to return to the

DIAGNOSTIC MENU.

3.

COPY program

(a)

Select COPY to display the following message:

FLOPPY DISK FORMAT & COPY : VX.XX

Type select (0:2DD-2DD,1:2D-2D,2:2D-2HD,3:2HD-2HD) ?

(b)

Select a media/drive type number to display a message similar to the one
below:

Insert source disk into drive A:

Press any key when ready.

Summary of Contents for T3400




















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands