manualshive.com logo in svg

Toshiba T3400, Maintenance Manual

Share
Download
Toshiba T3400 Maintenance Manual Download Page 84

T3400, T3400CT

3-41

3.18 Log Utilities

3.18.1

Function Description

This function logs error information generated while a test is in progress and stores the results
in RAM.  Data can be stored on a floppy disk or output to a printer.  If power is turned off,
the error information will be lost.  Error information is displayed in the following order:

1.

Error count (CNT)

2.

Test name (TS-NAME)

3.

Subtest number (TS-NAME)

4.

Pass count (PASS)

5.

Error status (STS)

6.

FDD/HDD or memory address (ADDR)

7.

Write data (WD)

8.

Read data (RD)

9.

HDC status (HSTS)

10.

Error status name ( ERROR STATUS NAME)

3.18.2

Operations

1.

Select 

5

 in the DIAGNOSTIC MENU and press 

Enter

 to log error information

into RAM or a floppy disk.  Error information is displayed in the following format:

    XXXXX ERRORS
CNT TS-NAME PASS STS ADDR    WD RD HSTS [STATUS NAME]

001 FDD 02 0000  103 00001   00 00       FDD - WRITE PROTECTED
001 FDD 01 0000  180 00001   00 00       FDD - TIME OUT ERROR

                     Address
                 Error status

            Pass count              HDC status

        Subtest number          Read data

    Test name               Write data

Error count                                   Error status

name

[[1:Next,2:Prev,3:Exit,4:Clear,5:Print,6:FD Log Read,7:FD Log Write]]

Summary of Contents for T3400




















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands