Toshiba T3400 Maintenance Manual Download Page 86

Page: 86 / 179

T3400, T3400CT

3-43

3.19 Running Test

3.19.1

Function Description

This function executes the following tests in sequence:

System test (subtest number 01)

Memory test (subtest numbers 01, 02, 04, 06, 07)

Display test (subtest numbers 01 to 08)

FDD test (subtest number 02)

HDD test (subtest numbers 01, 05

Real timer test (subtest number 02)

Printer test (subtest number 03)

Async test (subtest number 01)

The system detects the number of floppy disk drives connected to the T3400/T3400CT for the
FDD test.

3.19.2

Operations

CAUTION

: Do not forget to load a work disk in the FDD. If a work disk is not

loaded, an error will be generated during FDD testing.

Remove the diagnostics disk from the FDD and insert the work disk.

Select

from the Diagnostic Menu and press

Enter

to display

the following

message:

Printer wrap around test (Y/N) ?

Select

Y (yes)

to execute the printer wraparound test. A printer wraparound

connector must be connected to the

PRT/FDD

port on the back of the T3400/

T3400CT to execute this test.

Select

and press

Enter

. The following message will appear:

Serial #A wrap around test (Y/N) ?

Select

Y (yes)

to execute the ASYNC wraparound test. An RS-232C wraparound

connector must be connected to the

serial port

on the back of the T3400/

T3400CT to execute this test.

Summary of Contents for T3400




















































































































































































Search results

Summary of Contents for T3400

Reviews:

Brands by name

Popular brands

Toshiba T3400, Maintenance Manual

Search results

Summary of Contents for T3400

Reviews:

Brands by name

Popular brands