T2150 Series
4-25
4.
Remove
four M2x3 black screws
securing the bracket to the CD-ROM drive and
slip off the bracket (figure 4-20).
Figure 4-20 Removing the HDD
Installing the CD-ROM Drive
To install the T2150 series CD-ROM drive, follow the steps below and refer to figures 4-19
and figures 4-20.
1.
Secure the bracket to the
HDD
with
four M2x3 black screws
(figure 4-20).
2.
Place the
CD ROM drive
in the computer, and connect the
CD-ROM cable
to
PJ8
, then secure to the system board and the CD-ROM front cover with
three
M2.5x6 screws
(figure 4-19).
3.
Install the AC PS unit, display assembly, top cover, hard disk drive, keyboard,
optional memory module, optional PCMCIA card, and battery pack as described in
sections 4.8 back through 4.2.
Summary of Contents for T2150 series
