4-22
T2150 Series
4.8
AC PS Unit
Removing the AC PS Unit
To remove the T2150 series AC PS unit, follow the steps below and refer to figure 4-18.
1.
Turn the computer's power off. Disconnect the AC power cord and all external
cables connected to the T2150 series.
2.
Remove the battery pack, optional PCMCIA card, optional memory module,
keyboard, hard disk drive, top cover, and display assembly as described sections
4.2 through 4.7.
3.
Remove
one M2.5x10 screw
on the
AC PS unit
(figure 4-18).
4.
Remove
three M2.5x8 silver screws
on the
LED cover
(figure 4-18).
5.
Disconnect the
AC power cable
from
PJ501
and lift the
AC PS unit
with
AC
power socket
from the system unit (figure 4-18).
6.
Press in the
power switch
to free the
power switch frame
and remove the
LED
cover/power switch frame
from the system unit.
Figure 4-18 Removing the AC PS unit
Summary of Contents for T2150 series
