T2150 Series
4-17
Installing the Hard Disk Drive and Sound Board
To install the T2150 series hard disk drive, follow the steps below and refer to figures
4-12 through 4-14.
1.
Place the
HDD
in the HDD slot and slide the HDD to the right. Make sure the
HDD connects to the HDD connector on the system board (PJ502) (figure 4-14).
2.
Secure the
HDD bracket
with the t
wo M2.5x8 silver screws
(figure 4-14).
3.
Seat the
palm rest cover-support
, and secure the
left side cover
(figure 4-14).
4.
Seat the
sound board
and connect the
sound cable
to
PJ1
on the
sound board
.
5.
Seat the
sound board cover
and
side cover
and secure
three M2.5x4 screws
.
6.
Turn the computer over and secure the
HDD
with the
four pan-head M3x6
screws
(figure 4-12).
7.
Install the keyboard, optional memory module, optional PCMCIA card, and
battery pack as described in sections 4.5 back through 4.2.
Summary of Contents for T2150 series
