4-34
Installing the T1900C LCD Module
To install the T1900C’s LCD module, follow the steps below and refer to Figure 4-28.
1.
Connect the
three display cables
to the LCD module, and carefully rotate the LCD
module into the LCD cover.
2.
Secure the
M2.5x6 screw
on the LCD module.
3.
Install the FL inverter board, display assembly, display mask, top cover, optional
PCMCIA card, optional memory card and battery pack as described in Sections
4.13, 4.9, 4.8, 4.5, 4.4, 4.3 and 4.2.
Summary of Contents for T1950
