4-10
5.
Open the
expansion memory slot cover
on the right side of the unit (Figure 4-6).
6.
Using a jeweler's screwdriver, remove the
screw cover
located above the function
keys, then remove the
M2.5x10 screw
(Figure 4-6).
NOTE
: Be sure to use the correct screws when reassembling the top cover.
7.
Unsnap the
latches
securing the
top cover
to the base assembly. Start by pressing
on the front of the
top cover
just in front of the space bar and rotate the keyboard's
front edge toward you to release the
front latches
(Figure 4-6).
8.
Continue around the rim until all latches are released, then carefully lift up the
top
cover
(Figure 4-6).
NOTES:
(1) The latch on the back left corner may catch. To release this
latch, gently jiggle the cover back and forth to free it from the
chassis.
(2) As you remove the top cover, the RGB and PRT port protective
covers will fall away from the back of the unit.
Figure 4-6 Unlatching the Top Cover
Summary of Contents for T1950
