Toshiba Surveillix ESV16 User Manual Download Page 220

Page: 220 / 242

220

ESV16

User’s

Manual

• The USB hard disk needs to have more than 100MB remaining space

• If multiple partitions are presented in one disk, only the first partition
will be detected and used for backup

Process:

• Progress will be displayed on the UI

• If the backup process gets interrupted, which the process stops at a

point of time that is before the “END Time” user defined, such time will
be displayed on the UI

• A folder will be automatically created in the USB hard disk with a

name format like 0028687831_20100610151515_2010060511
0010_20100606110010 (MAC_backupbuttonclicktime_starttime_

endtime)

Note:

• Please plug in the USB HDD only after the NVR is fully started, or the

HDDs will be incorrectly mounted.

• Play the backed up files using the NVR media player.

Summary of Contents for Surveillix ESV16



















































































































































































































































Search results

Summary of Contents for Surveillix ESV16

Reviews:

Related manuals for Surveillix ESV16

Brands by name

Popular brands

Toshiba Surveillix ESV16, User Manual

Search results

Summary of Contents for Surveillix ESV16

Reviews:

Related manuals for Surveillix ESV16

Brands by name

Popular brands