Toshiba Surveillix ESV16 User Manual Download Page 103

Page: 103 / 242

ESV16

User’s

Manual

103

Deleting RAID

Once a RAID volume is created, it can be deleted at anytime by

choosing the "Delete RAID" action in the RAID volume page. All
existing data will be removed after the RAID volume is deleted.

All internal disks that were originally used for RAID volume will have to
be formatted again after the RAID volume is deleted.

Notes for RAID function

* Once a RAID volume is created, the “Delete RAID" option should be

presented in the “Disk Action” drop-down menu. (Regardless the RAID
volume has been formatted or not)

* Only RAID1 and RAID 5 have repair function

* The recording should continue even when RAID 1 or RAID 5 volume

fails or is rebuilding.

* The replacement hard drive size must be larger or equal to the size

of the smallest disk in the volume.

* The internal disks do not need to be formatted prior to creating RAID

volume.

* Create RAID with an existing RAID volume is not allowed.

Summary of Contents for Surveillix ESV16



















































































































































































































































Search results

Summary of Contents for Surveillix ESV16

Reviews:

Related manuals for Surveillix ESV16

Brands by name

Popular brands

Toshiba Surveillix ESV16, User Manual

Search results

Summary of Contents for Surveillix ESV16

Reviews:

Related manuals for Surveillix ESV16

Brands by name

Popular brands