Toshiba Satellite Pro A60 Series Maintenance Manual Download Page 90

Page: 90 / 270

3 Diagnostic Programs

3.3 Option

3.3.6 LOG Parameters Setting

You can access the Log Parameters screen through Service Diagnostics\Options -
Generate Report.

•

Report Destination

If selecting 'NONE', no log file will be generated; if selecting 'FILE', a log file with
the name specified in 'Log File Name' will be generated.

•

Log Options

Log Errors

If selecting this parameter, errors will be recorded when the test fails.

Log Test Activities

If selecting this parameter, the subtest results will be recorded.

Log Test Start Time

If selecting this parameter, the start time of the test will be recorded.

Log Test End Time

If selecting this parameter, the end time of the test will be recorded.

Log Errors Only

If selecting this parameter, errors will be recorded only when the test fails.

Log Errors Only with Time

Satellite A60/ Pro A60 Maintenance Manual

Summary of Contents for Satellite Pro A60 Series















































































































































































































































































Search results

Summary of Contents for Satellite Pro A60 Series

Reviews:

Related manuals for Satellite Pro A60 Series

Brands by name

Popular brands

Toshiba Satellite Pro A60 Series, Maintenance Manual

Search results

Summary of Contents for Satellite Pro A60 Series

Reviews:

Related manuals for Satellite Pro A60 Series

Brands by name

Popular brands