background image

User's Guide

VB Model

Checking Included Accessories.............................................2

Connecting Included Accessories .........................................2

Windows Setup ......................................................................3

Knowing the Parts ..................................................................6

Battery....................................................................................8

Keyboard................................................................................9

NX pad (Touchpad) ................................................................9

Switching Display Outputs ...................................................10

LAN Function....................................................................... 11

Wireless LAN Function ........................................................ 12

Memory ............................................................................... 13

System Configuration.......................................................... 14

Security Chip Function........................................................ 15

Applications......................................................................... 16

Recovery ............................................................................. 19

Appendix ............................................................................. 22

Note: The illustrations, screenshots, icons, and on-screen text shown in this document may differ from the ones you actually encounter.

This User's Guide contains information primarily specific to this computer, assuming that the user is able to perform basic Windows operations and 
understands how to use help in its installed applications to resolve problems. In this user's guide, unless specified, "Windows" refers to Windows 
10 Pro 64 bit system and "hard disk" refers to a hard disk or solid-state drive (SSD). Configuration and application installation should be conducted 
by a user who has administrator privileges. If a [User Account Control] screen comes up, please be sure to confirm the contents before continuing.

The information contained within this manual applies to the following models:

• VB Model: VG23T/B-T

Note: For details about a model number, please see "Model number list" (p.23).

1

2

3

4

1

5

6

7

8

9

10

11

12

13

15

16

Summary of Contents for VersaPro VB VG23T/B-T

























Reviews: