Toshiba Satellite Pro A60 Series Maintenance Manual Download Page 32

Page: 32 / 270

1 Hardware Overview

1.9 Power Supply

1.7 Power Supply

The power supply unit provides many different voltages for the system board and performs
the following functions:

1. Power input monitor

•

Checks whether the DC power supply (AC adapter) is connected to the computer.

•

Checks whether the battery pack is connected to the computer.

•

Monitors the DC power supply input voltage (AC Adapter output voltage).

2. Power supply's internal control

•

Turns on and off the battery pack charging power supply.

•

Issues a charging current instruction to the PWM control IC of the battery pack
charging power supply.

•

Controls the supply of DC power supply input (AC Adapter output) to the power
supply unit.

•

Controls the supply of power to the system block (load/logic circuit side).

•

Controls forced shutdown if the power supply malfunctions.

3. Logic circuit control

•

Instructs the gate array to enable/disable tuning the power on.

•

Controls power-on/off operation.

4. Status

display

•

Turns on the Power LED (in Green or AMBER).

•

Battery indicator (in Green or AMBER).

5. External

interface

•

Performs communication through the I2C bus (via the internal EC/KBC).

•

Transfers the power supply operation mode.

6. Output

monitor

•

Monitors the voltage output to the system block (load/logic circuit side).

•

Monitors the voltage, overvoltage, input/output current of the battery pack.

•

Monitors the internal temperature of the battery pack.

•

Monitors the supply voltage from the AC adapter.

1-18

Satellite A60/ Pro A60 Maintenance Manual

Summary of Contents for Satellite Pro A60 Series















































































































































































































































































Search results

Summary of Contents for Satellite Pro A60 Series

Reviews:

Related manuals for Satellite Pro A60 Series

Brands by name

Popular brands

Toshiba Satellite Pro A60 Series, Maintenance Manual

Search results

Summary of Contents for Satellite Pro A60 Series

Reviews:

Related manuals for Satellite Pro A60 Series

Brands by name

Popular brands