manualshive.com logo in svg

Toshiba Satellite Pro A120, Maintenance Manual

Share
Download
Toshiba Satellite Pro A120 Maintenance Manual Download Page 239

3.30  SETUP 

3 Tests and Diagnostics 

TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573) 

[CONFIDENTIAL] 

3-105 

NOTE: If these selections ((*1) or (*2)) are made, you cannot warm boot the 

system by pressing 

Ctrl + Alt + Del

. 

(c)

 

Parallel Port Mode 

Use this option to set information of Parallel Port Mode. 

ECP 

 

 

 

  Sets the port mode to Extended Capabilities Port (ECP). 

For most printers, the port should be set to ECP. (Default) 

Std. Bi-Direct. 

Sets the bi-directional setting. This setting should be used 
with some other parallel devices. 

NOTE: When using Windows, the setting of “Toshiba HW setup” is enabled and the 

setting of “Parallel Port Mode” is disabled. 

15.

 

Legacy Emulation. 

(a)

 

USB KB/Mouse Legacy Emulation. 

Use this option to enable or disable USB KB/Mouse Legacy Emulation. If 
your operating system does not support USB, you can still use a USB mouse 
and keyboard by setting the 

USB KB/Mouse Legacy Emulation

 item to 

Enabled

. 

Enabled

   

 

USB Legacy Support can be used. (Default)

 

Disabled

   

 

USB Legacy Support cannot be used. 

(b)

 

USB-FDD Legacy Emulation. 

Use this option to enable or disable USB-FDD Legacy Emulation. 

Enabled

   

 

USB Legacy Support can be used. (Default)

 

Disabled

   

 

USB Legacy Support cannot be used. 

(c)

 

USB Memory BIOS Support Type 

Sets the type of the USB memory as a startup device. 

HDD

   

 

Set the type of the USB memory to be equivalent to the HDD 
(Default). 

Based on the [HDD] order in the [Boot Priority Options] item. 
The order with respect to the other HDD can be set in the 
[HDD Priority Options] item.

 

FDD

   

 

Set the type of the USB memory to be equivalent to the FDD. 

Based on the [FDD] order in the [Boot Priority Options] item. 

Summary of Contents for Satellite Pro A120













































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands