Toshiba Satellite Pro A120 Maintenance Manual Download Page 233

Page: 233 / 428

3.30 SETUP

3 Tests and Diagnostics

TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)

[CONFIDENTIAL]

3-99

FDD

→

CD-ROM

→

LAN

→

HDD:

The computer looks for bootable files
in the following order: FDD, CD-ROM,
LAN and HDD.

CD-ROM

→

LAN

→

HDD

→

FDD:

The computer looks for bootable files
in the following order: CD-ROM, LAN,
HDD and FDD.

CD-ROM

→

LAN

→

FDD

→

HDD:

The computer looks for bootable files
in the following order: CD-ROM, LAN,
FDD and HDD.

NOTE: CD-ROM refers to a DVD-ROM&CD-R/RW drive or DVD Super Multi drive.

(b)

HDD Priority

This option enables to select the priority for the Built-in HDD or USB.

Built-in HDD

→

USB

(Default)

USB

→

Built-in HDD

(c)

Network Boot Protocol

Use this option to set the starting method via a network.

PXE

Sets to PXE protocol. (Default)

RPL

Sets to RPL protocol.

Others

Whether or not you need to configure the computer with these options depends
primarily on the kind of software or peripherals you use.

(a)

Core-Multi Processing

The Core Multi-Processing sets the CPU operating mode of Core Multi-
Processor.

Enabled

Enables Core Multi-Processing functions. (Default)

Disabled

Disables Core Multi-Processing functions.

(b)

Dynamic CPU Frequency Mode

Use this option to choose a setting from the followings.

Dynamically Switchable

Enables Intel SpeedStep technology. When the computer is
in use, the CPU power consumption and clock speed are
automatically switched when necessary. (Default)

Summary of Contents for Satellite Pro A120













































































































































































































































































































































































































































Search results

Summary of Contents for Satellite Pro A120

Reviews:

Related manuals for Satellite Pro A120

Brands by name

Popular brands

Toshiba Satellite Pro A120, Maintenance Manual

Search results

Summary of Contents for Satellite Pro A120

Reviews:

Related manuals for Satellite Pro A120

Brands by name

Popular brands