manualshive.com logo in svg

Toshiba Satellite Pro A120, Maintenance Manual

Share
Download
Toshiba Satellite Pro A120 Maintenance Manual Download Page 18

1  Hardware Overview 

1.1 Features 

1-4 

[CONFIDENTIAL]  

TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)

 

‰

 

Internal LAN/ Internal modem 

The computer has built-in support for Ethernet LAN (10 megabits per second, 10BASE-
T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and Gigabit Ethernet 
LAN (1000 megabits per second, 1000BASE-T).  

The computer contains a MDC, enabling data and fax communication. 

‰

 

Bluetooth  

The computer is equipped with Bluetooth (V2.0+EDR) communications standard enable 
wireless connection between electronic devices such as computers and printers.

 

It 

supports wireless communication switch. 

‰

 

Wireless LAN  

The computer is equipped with PCI Express Mini Card type wireless LAN card that 
supports 802.11 b/g or 802.11 a/b/g in the PCI Express Mini Card slot. This function can 
be switched on and off by a switch on the computer. 

‰

 

Presentation button 

This button switches the display between internal display, external display, simultaneous 
display and multi-monitor display. 

‰

 

TOSHIBA Assist button 

When this button is pressed during power-on, the computer is connected to “Toshiba 
Assist”. When this button is pressed during power-off, the computer is turned on and 
connected to “Toshiba Assist”. 

Summary of Contents for Satellite Pro A120













































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands