Toshiba Satellite M20 Maintenance Manual Download Page 175

Page: 175 / 296

4.3 Selectable Bay Modules

4 Replacement Procedures

Disassembling the DVD-ROM Drive

NOTE:

Do not disassemble the DVD-ROM drive when it is working normally.

Disassemble or replace the DVD-ROM drive only if it failed.

Disassemble the DVD-ROM drive according to the following procedures and Figures 4-12 and
4-13.

1. Remove the

two

M2x8 black bind screws.

2. Remove the

connector cover

and

connector

from the DVD-ROM drive.

Figure 4-12 Removing the connector from the DVD-ROM drive

3. Remove the five

M2x3 white super flat-head screws.

4. Remove

the

frame.

Satellite M20 Maintenance Manual

4-23

Summary of Contents for Satellite M20









































































































































































































































































































Search results

Summary of Contents for Satellite M20

Reviews:

Related manuals for Satellite M20

Brands by name

Popular brands

Toshiba Satellite M20, Maintenance Manual

Search results

Summary of Contents for Satellite M20

Reviews:

Related manuals for Satellite M20

Brands by name

Popular brands