Toshiba Satellite M20 Maintenance Manual Download Page 95

Page: 95 / 296

3 Diagnostic Programs

3.3 Option

With this parameter selected, the start time of the test will be recorded.

Log Test End Time

With this parameter selected, the end time of the test will be recorded.

Log Errors Only

With this parameter selected, errors will be recorded only when the test fails.

Log Errors Only with Time

With this parameter selected, errors and time will be recorded only when the
test fails.

Append to Old Log File

With this parameter selected, the new log will be added to the old one.

Log Device Info on Fail

With this parameter selected, details of the failed test will be recorded.

•

Log file Name

Specify the Log file name. You can input the detail path of the file. System will
show the detail path of the file.

3.3.7 Specify LOG Viewer

You can specify the Log file viewer in the Specify Log Viewer screen.

The default viewing program of Service Diagnostics is

LogView.exe

3.3.8

Display LOG File

You can specify the Log file for viewing in the Display Error Log File screen.

Satellite M20 Maintenance Manual

Summary of Contents for Satellite M20









































































































































































































































































































Search results

Summary of Contents for Satellite M20

Reviews:

Related manuals for Satellite M20

Brands by name

Popular brands

Toshiba Satellite M20, Maintenance Manual

Search results

Summary of Contents for Satellite M20

Reviews:

Related manuals for Satellite M20

Brands by name

Popular brands