Toshiba Satellite M20 Maintenance Manual Download Page 183

Page: 183 / 296

4.7 Speaker

4 Replacement Procedures

4.7 Speakers

Removing the Speakers

Remove the speakers according to the following procedures and Figure 4-20 and 4-21.

1. Turn the computer upside down, remove the two M2.5x20 black bind screws

2. Disconnect the speaker cables CN8 and CN9 on the system board.

3. Remove the speaker cables from the guides (grooves) on the top cover.

4. Remove the two and M2.5x6 black flat-head screws (one screw for one speaker).

5. Remove the left and right speakers.

Figure 4-20 Removing the speakers

Satellite M20 Maintenance Manual

4-31

Summary of Contents for Satellite M20









































































































































































































































































































Search results

Summary of Contents for Satellite M20

Reviews:

Related manuals for Satellite M20

Brands by name

Popular brands

Toshiba Satellite M20, Maintenance Manual

Search results

Summary of Contents for Satellite M20

Reviews:

Related manuals for Satellite M20

Brands by name

Popular brands