Toshiba Satellite M20 Maintenance Manual Download Page 170

Page: 170 / 296

4 Replacement Procedures

4.2 HDD

4.2 HDD

Removing the HDD

CAUTION

: Do not press the top or bottom of the drive.

Applying such pressure can corrupt the data in the drive or
damage the drive.

Remove the HDD (hard disk drive) according to the following procedures and Figures 4-8, 4-9,
and 4-10.

1. Remove one M2.5x6 black bind screw for fixing the HDD cover.

2. Remove the HDD cover by sliding it in the direction of the arrows.

Figure 4-8 Removing the HDD cover

4-18

Satellite M20 Maintenance Manual

Summary of Contents for Satellite M20









































































































































































































































































































Search results

Summary of Contents for Satellite M20

Reviews:

Related manuals for Satellite M20

Brands by name

Popular brands

Toshiba Satellite M20, Maintenance Manual

Search results

Summary of Contents for Satellite M20

Reviews:

Related manuals for Satellite M20

Brands by name

Popular brands